Blog Yazıları
Rain Erosion in Dry-Mix Paints: Permanent Solutions via Powder Silicone Modification
Dedicated guide for R&D managers: Powder silicone modification and hydrophobic network structure to prevent rain erosion...
Bleeding Issues in Self-Leveling Screeds and Superplasticizer Selection
Examine the chemical causes of bleeding and segregation problems in self-leveling screed formulations and the rheologica...
Loss of Elasticity in Liquid Waterproofing and Acrylic Selection Criteria
Loss of elasticity at low temperatures in liquid-applied waterproofing membranes, acrylic dispersion selection, and crac...
Low-Temperature Cracking and Coalescent Strategy in Water-Based Paints
Discover in detail how to solve the low-temperature mud-cracking problem in water-based architectural paints using ester...
Setting Stabilization with Lithium Sulfate in Ternary System Alums
Discover the technical details of how to stabilize setting time fluctuations in self-leveling screeds and rapid repair m...
Hairline Crack Defects and SRA Approach in Architectural Precast Production
Explore the causes of capillary crack defects encountered in architectural precast production, the drying shrinkage mech...
Freeze-Thaw Damage in Exterior Mortars: Micro-Bubble Strategy
Explore through technical analysis how to establish a stable micro-bubble network with air-entraining agents to prevent ...
Cold Cracking in Liquid Waterproofing and Proper Acrylic Selection
Analyze the causes of cold cracking problems observed in liquid waterproofing membranes, the importance of the Tg value,...
Rutile TiO2 Optimization Against Hiding Power Deficiencies in Exterior Facade Paints
Solve low opacity and early yellowing issues in exterior paints with rutile TiO2 optimization. Raw material selection cr...
Capillary Absorption Control with Zinc Stearate in Water-Repellent Gypsum Production
Examine the hydrophobic mechanism and production dynamics of zinc stearate against capillary water absorption problems i...
Sedimentation Defect in Color Pastes and Dispersant Optimization: Soy Lecithin and Polyacrylate Solutions
Causes of flocculation and sedimentation issues in colorants used in tinting systems. Optimization of Soya Lecithin and ...
Volume Loss in Lightweight Plaster Production and the Selection of the Correct Air-Entraining Agent
Technical details on selecting the correct air-entraining agent that creates stable micro-bubbles to solve lightweight p...