CEM II/A-LL 52,5R (SUPER WHITE +) - BULK CEMENT

Produced in accordance with TS EN 197-1 standards, Super White Cement is a special Portland cement (CEM I 52,5 R) that combines high aesthetic expectations with superior mechanical performance. Thanks to its minimum 85% whiteness ratio and high early strength properties, it ensures efficiency and quality in both architectural projects and industrial production processes.

Key Technical Advantages

• High Whiteness and Stability: Provides color integrity in architectural applications with a minimum 85% whiteness value and stable color tone.
• Early Strength: Achieves a minimum compressive strength of 30.0 MPa on the 2nd day, shortening demolding times and increasing production speed.
• Workability: Offers the appropriate 'Open Time' and high workability required in the production of construction chemicals.
• Smooth Surface: Its high fineness allows for the achievement of smooth and aesthetic surfaces in precast production.

Areas of Application

This product is particularly preferred in the following areas where aesthetics and durability are critical:

• Precast and Prestressed Concrete: Elements requiring mass production due to high early strength.
• Construction Chemicals: Joint fillers, tile adhesives, and repair mortars.
• Urban Furniture: Paving stones, curbs, and decorative concrete elements.

Technical Specifications Table

Application and Storage Recommendations

For optimum performance, water/cement ratios specified in standards must be adhered to, and appropriate curing procedures should be followed. Its use is not recommended in mass concrete requiring low heat of hydration. The product should be protected from moisture, wind, and cold; bagged products should be stacked no more than 10 rows high, and bulk products should be stored in appropriate silos.