CEM II/A-LL 52,5R (SPRB+) BIB 1,50t BIG BAG CEMENT

CEM II/A-LL 52,5R (SPRB+) BIB 1,50t Big Bag Cement is a special binder produced in accordance with TS EN 197-1 standards, featuring a high whiteness ratio and superior early strength properties. With a minimum whiteness value of 85% and a stable color tone, it yields excellent results in projects with high aesthetic expectations. This product, belonging to the 52,5R strength class, provides time and cost advantages, especially in production processes requiring rapid demolding.

Key Features and Advantages

• High Whiteness: Provides clean and bright surfaces in architectural and decorative applications with a minimum whiteness ratio of 85%.
• Early Strength (R): Supports rapid manufacturing processes by withstanding a minimum pressure of 30,0 MPa on the 2nd day.
• High Workability: Ideal for construction chemicals and complex mold applications due to its suitable 'Open Time' property.
• Smooth Surface: Achieves smooth and aesthetic surface finishes in precast elements due to its high fineness.

Areas of Use

This product has a wide range of applications where both aesthetics and durability are desired:

• Precast Production: Prestressed concrete and facade claddings due to its early and ultimate high strength.
• Construction Chemicals: Production of joint fillers, tile adhesives, and repair mortars.
• Urban Furniture: Paving stones, curbs, and decorative concrete elements.

Application and Storage Precautions

To achieve maximum performance from the product, the water/cement ratios specified in the standards must be adhered to, and appropriate curing procedures must be applied. Bulk cements should be stored in silos away from moisture, while bagged products should be stored in warehouses protected from wind and rain, stacked no more than 10 rows high. Its use is not recommended in mass concrete requiring low heat of hydration.